Filter
Top Products
1-100
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
REL/Release Timepoint (Tag: 4006)
Crash Timepoint (Tag: 4007)
Originating Trunk Group (Tag: 4008)
Table 1-69 REL/Release Timepoint Description Form
Name: REL/Release Timepoint Tag: 4006 Source: MDL/Engine
Description/Purpose: Timepoint for receipt of first REL/Release.
Format: BE Length in Octets: 4
Data Value: UNIX time format (number of seconds since January 1, 1970).
Extended Data Value: No extended value.
General Information: This message can be sent in either direction indicating that the circuit identified in the message is
being released due to the reason (cause) supplied and is ready to be put in idle state on receipt of the release complete
message.
This message provides the release of the circuit of a call initiated by the IAM message.
MGC Release: Release 5.0 and later.
Table 1-70 Crash Timepoint Description Form
Name: Crash Timepoint Tag: 4007 Source: MDL/Engine
Description/Purpose: Last known timepoint before a crash.
Format: BE Length in Octets: 4
Data Value: UNIX time format (number of seconds since January 1, 1970).
Extended Data Value: No extended value.
General Information:
MGC Release: Release 5.0 and later.
Table 1-71 Originating Trunk Group Description Form
Name: Originating Trunk Group Tag: 4008 Source: MDL/Engine
Description/Purpose: Holds the originating trunk group number.
Note If you are using the Multiple Incoming IP Trunk Groups feature, this CDR contains the derived incoming trunk
group ID.
Format: BE Length in Octets: 2
Data Value: The trunk group number ranges from 1 to 16,384 for ANSI and 1 to 4096 for ITU.
Extended Data Value: No extended value.
General Information: When creating Bellcore AMA Format (BAF) records downstream, BAF supports only 4 digits for the
trunk group number. This makes the practical limit 9999.
MGC Release: Release 5.0 and later.