Filter
Top Products
1-150
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Rejecting Location Label (Tag: 4232)
Rejecting Location Label Direction (Tag: 4233)
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.6(1) and later.
Table 1-176 Rejecting Location Label Description Form
Name: Rejecting Location Label Tag: 4232 Source: MDL
Description/Purpose: Name of the Call-limiting location label which caused the call rejection.
Format: IA5 (string) Length in Octets: 1–20
Data Value:
String
Example: londonVpnUser652
ANSI/ITU Variations: None.
Extended Data Value: No extended value.
General Information: For calls with location labels defined, a call limiting check must be made once the terminating side
is set up. This involves reading internal tables to get call limit data and active call counter data. If the call limit threshold
is reached, then the call is rejected against that location label. This record provides the identity of the location label that
failed the call.
This tag is only added to the CDB if the call limiting check results in rejection.
MGC Release: Release 9.6(1) and later.
Table 1-177 Rejecting Location Label Direction Form
Name: Rejecting Location Label Direction Tag: 4233 Source: MDL
Description/Purpose: Indication of whether or not the call was rejected by a location label relating to the MGC originating
(incoming) or terminating (outgoing) side.
Format: BE Length in Octets: 1
Data Value:
1 = Inbound (MGC originating side)
2 = Outbound (MGC terminating side)
ANSI/ITU Variations: None.
Table 1-175 Route Optimization Switchover Timestamp (continued)