Filter
Top Products
1-115
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Service Logic ID (Tag: 4049)
AMA Line Number (Tag: 4050)
Table 1-104 Service Logic ID Description Form
Name: Service Logic ID Tag: 4049 Source: MDL
Description/Purpose: This field value is used in an advanced intelligent network (AIN) environment. It records an
identification of service logic in the SCP that was used. The AMAslpID returns from the SCP hold the service logic ID
value.
Format: IA5 Length in Octets: 9
Data Value: 000000001 – 899999999
Extended Data Value: No extended value.
General Information: This field value implies that the mediation software (when configured to generate AMA) generates
Structure Code 220. (For more details please refer to Telcordia GR-2892-CORE Section 8.)
Note This CDE is not applicable to INAP calls.
MGC Release: Release 7.0 and later.
Table 1-105 AMA Line Number Description Form
Name: AMA Line Number Tag: 4050 Source: MDL
Description/Purpose: This field value is used in an AIN environment. It is included in the Analyzed_Route message. It uses
an AIN digits format and contains the original called party ID, incoming terminating number, or ANI.
Format: IA5 Length in Octets: 15
Data Value: Up to a 12-digit line number and a 3-digit line number type.
Extended Data Value: No extended value.
General Information: This field value implies that the mediation software (when configured to generate AMA) generates
Structure Code 220 with AMALineNumber to be recorded in Module Code 307. (For more details, please refer to Telcordia
GR-2892-CORE Section 8.)
Note The Analyzed_Route message allows up to two AMALineNumber parameters; therefore, the Cisco MGC can save
up to two AMA line numbers, and the mediation can generate two module Code 307s.
Note This CDE is not applicable to INAP calls.
MGC Release: Release 7.0 and later.