Filter
Top Products
1-86
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
110/0010/98 Message not compatible with call state or
message type non-existent or not
implemented—indicates that the equipment
sending this cause has received a message
such that the procedures do not indicate that
this is a permissible message to receive while
in the call state, or a STATUS message was
received indicating an incompatible call state.
DSS 1 Q.931 U, LN
110/0011/99 Information element/parameter non-existent
or not implemented—indicates that the
equipment sending this cause has received a
message which includes information
element(s)/parameter(s) not recognized
because the information element
identifier(s)/parameter name(s) are not
defined or are defined but not implemented by
the equipment sending the cause. This cause
indicates that the information element(s)/
parameter(s) were discarded. However, the
information element is not required to be
present in the message in order for the
equipment sending the cause to process the
message.
DSS 1, ISUP Q.931 U, LN
2.9.5.2/
Q.764,
2.9.5.3/
Q.764,
Annex A/
Q.763
TN, INTL,
RLN
110/0100/100 Invalid information element
contents—indicates that the equipment
sending this cause has received an
information element which it has
implemented; however, one or more fields in
the information element are coded in such a
way which has not been implemented by the
equipment sending this cause.
DSS 1 Q.931 U, LN
110/0101/101 Message not compatible with call
state—indicates that a message has been
received which is incompatible with the call
state.
DSS 1 Q.931 U, LN
Table 1-53 Cause Information Element/Parameter Definitions (continued)
Cause
Class/Value/No. Definition
Application
(Note 1)
Reference
(Note 2)
Location
(Note 3) Remarks