Filter
Top Products
1-127
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
MCID Response Indicator (Tag: 4086)
Ingress MGCP DLCX Return Code (Tag: 4087)
Egress MGCP DLCX Return Code (Tag: 4088)
Table 1-131 MCID Response Indicator Description Form
Name: MCID Response Indicator Tag: 4086 Source: MDL
Description/Purpose: Allows the carrier to determine whether MCID is included or not.
Format: BE Length in Octets: 1
Data Value:
MCID Response Indicator information is 1 bit and is defined as follows:
0 MCID not included
1 MCID included
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.5(2) and later.
Table 1-132 Ingress MGCP DLCX Return Code Description Form
Name: Ingress MGCP DLCX Return Code Tag: 4087 Source: MDL
Description/Purpose: Indication of MGCP DLCX (Delete Connection) return code value on the ingress gateway.
On Release 9.7(3), the H.248 Protocol feature is added. If an H.248 gateway is engaged on the ingress side, this tag is not
logged in to CDR.
Format: BE Length in Octets: 1
Data Value: Return code value returned by the associated media gateway.
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.5(2) and later.
Table 1-133 Egress MGCP DLCX Return Code Description Form
Name: Egress MGCP DLCX Return Code Tag: 4088 Source: MDL
Description/Purpose: Indication of MGCP DLCX (Delete Connection) return code value from the egress gateway.
On Release 9.7(3), the H.248 Protocol feature is added. For the H.248 gateway, this tag is not logged in to CDR.
Format: BE Length in Octets: 1
Data Value: Return code value returned by the associated media gateway.
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.5(2) and later.