Filter
Top Products
1-38
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
Detailed CDB Description
Note CDB 1071 is configurable in XECfgParm.dat by adding it in engine.CDRmessageType; but if CDB 1110
is configured, CDB 1071 is suppressed.
Once configured in XECfgParm.dat, CDB 1071 is generated for the following conditions.
• When the MML command sta-aud-cic is used to generate the current CIC availability information
on each configured ISUP trunk group or signaling service.
• A provisioning change (add or delete) is made in the number of circuits.
• A CIC service state or block state change occurs. A circuit that is unavailable is either blocked, OOS,
or both. A circuit that is blocked and also OOS is not double counted as unavailable circuits. The
following tables show the action taken when there is a service state or block state change.
A blocked state is one or a combination of the following states:
• Manual local block
• Manual remote block
• Auto remote block (hardware failure)
• Auto local block
Maint Trunk Group 4017 Appears when the MGC is
configured for call control.
Maintenance SigPath ID 4074 Appears when the MGC is
configured for signaling.
Total Circuit Count 4234 added in 9.4(1) patch
Total Circuit Unavailable Count 4235 added in 9.4(1) patch
Cisco Reserved Tags
Unique Call ID 5000
Table 1-13 SS7 CIC Audio CDB Record (continued)
Field Name
Tag
Value Comments
Table 1-14 Service State Change
Service State Change Blocked Unblocked
OOS Do nothing Increment total unavailable counters
IS Do nothing Decrement total unavailable counters
Table 1-15 Service Block Change
Service Block Change OOS IS
Block Do nothing Increment total unavailable counters
Unblock Do nothing Decrement total unavailable counters