Filter
Top Products
1-93
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Transit Network Selection (Tag: 3013/ITU)
Table 1-58 Transit Network Selection Description Form
Name: Transit Network Selection Tag: 3013 Source: MDL
Description/Purpose: Used to identify each previous network type transited.
Format: ITU-T Q.763 Length in Octets: 1-n
Data Value:
876 5 4 3 2 1
1 Odd/Even Type of network identification Network identification plan
2
.
.
.
2n
Network identification
The following codes are used in the subfields of the transit network selection parameter field:
Odd/even indicator
0Even number of digits
1Odd number of digits
Type of network identification
000CCITT-standardized identification
010National network identification
otherSpare
Network identification plan
For CCITT-standardized identification:
0000Unknown
0011Public data network identification code (DNIC), Recommendation X.121
0110 Public land mobile network identification code (MNIC), Recommendation E.212
otherSpare
For national network identification, this information is coded according to national specifications.
Network identification
This information is organized according to the network identification plan and the identified coding principle.
Note: The above values are for standard ITU SS7. Variants of ITU SS7 may have different values. Verify the values for your
variant with the appropriate specification, if necessary.
Extended Data Value:
General Information: This value is used only with the following ITU ISUPs: HONG_KONG, AUSTRALIAN, FRENCH,
NTT, and JAPAN. It can also be used for national ISUPs, within any particular country, with private designations for the
network type. For a national call, such as ANSI, this tag is generated along with 2014.205
MGC Release: Release 7.0 and later.