Filter
Top Products
1-76
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
The following table lists the Cause information element or parameter definitions for this tag.
Cause value: (only applicable in the context of Recommendations Q.763 and Q.931)
The cause value is divided into two fields, a class (bits 5 through 7) and a value within the class (bits 1 through 4).
The class indicates the general nature of the event. The valid values are as follows:
000 Normal event
001 Normal event
010 Resource unavailable
011 Service or option not available
100 Service or option not implemented
101 Invalid message (for example, parameter out of range)
110 Protocol error (for example, unknown message)
111 Interworking
The valid class values are listed in Table 1-53.
Extended Data Value:
Note Tag 3008 extends ANSI definition by adding COT failure indicators according to ANSI rules, with slight
modification as follows:
Octet 1:
Extension 0
Coding Standard 11
Spare 0
Location 0011
Octet 2:
Extension 1
Cause 1111110
General Information:
MGC Release: Release 7.0 and later.
Table 1-52 Reason Code Description Form (continued)
Table 1-53 Cause Information Element/Parameter Definitions
Cause
Class/Value/No. Definition
Application
(Note 1)
Reference
(Note 2)
Location
(Note 3) Remarks
000/0001/1 Unallocated (unassigned) number—indicates
that the called party cannot be reached
because, although the called party number is
in a valid format, it is not currently allocated
(assigned)
DSS 1, ISUP Q.931 U, RPN,
LN
RLN, TN,
INTL
No route by
digit analysis