5/26/05 Configuring System Parameters
OL-7426-03
CountryCountry
The Cisco Wireless LAN Controller has been designed to be used in countries with different 802.11
country codes.
• Use the show country command to view the current Cisco Wireless LAN Controller country.
• If necessary, set the Cisco Wireless LAN Controller country code by entering:
>config country <code>
Where <code> =
- US (United States of America), which allows 802.11b and 802.11g operation and
802.11a Low, Medium, and High bands.
- USL (US Low), which allows 802.11b and 802.11g operation and 802.11a Low and
Medium bands. (Used for legacy 802.11a interface cards that do not support 802.11a
High band.)
- AU (Australia), which allows 802.11a and 802.11b/g.
- AT (Austria), which allows 802.11a and 802.11b/g.
- BE (Belgium), which allows 802.11a and 802.11b/g.
- CA (Canada), which allows 802.11b/g.
- DK (Denmark), which allows 802.11a and 802.11b/g.
- FI (Finland), which allows 802.11a and 802.11b/g.
- FR (France), which allows 802.11a and 802.11b/g.
- DE (Germany), which allows 802.11a and 802.11b/g.
- GR (Greece), which allows 802.11b/g.
- IE (Ireland), which allows 802.11a and 802.11b/g.
- IN (India), which allows 802.11a and 802.11b.
- IT (Italy), which allows 802.11a and 802.11b/g.
- JP (Japan), which allows 802.11a and 802.11b/g.
- KR (Republic of Korea), which allows 802.11a and 802.11b/g.
- LU (Luxembourg), which allows 802.11a and 802.11b/g.
- NL (Netherlands), which allows 802.11a and 802.11b/g.
- PT (Portugal), which allows 802.11a and 802.11b/g.
- ES (Spain), which allows 802.11a and 802.11b/g.
- SE (Sweden), which allows 802.11a and 802.11b/g.
- GB (United Kingdom), which allows 802.11a and 802.11b/g.
• Continue with the next parameter.
Note: Refer to Cisco WLAN Solution Supported Country Codes for the latest country
codes.