5/26/05 Starting and Stopping the Cisco WCS Web Interface
OL-7426-03
Starting and Stopping the Cisco WCS Web InterfaceStarting and Stopping the Cisco WCS Web Interface
Starting a Cisco WCS User InterfaceStarting a Cisco WCS User Interface
This Cisco WCS interface is used by Cisco WCS operators as described in Cisco WCS User Interface.
Starting a Cisco WCS User Interface is a simple task.
• If not already done, start the Cisco WCS as described in Starting and Stopping Windows Cisco
WCS or Starting and Stopping Linux Cisco WCS.
• Launch Internet Explorer 6.0.
https://<localhost|Cisco WCS IP Address>
Example: https://176.89.43.44.
where:
- https:// is a secure (http + Secure Sockets Layer) login, to which the Cisco WCS
usually returns a Security Alert message before continuing.
- localhost is used when the Cisco WCS User Interface is on the Cisco WCS Server.
- Cisco WCS IP Address is the IP Address of the Cisco WCS on any other workstation.
The Cisco WCS User Interface displays the Cisco WCS Login page.
• In the Cisco WCS Login page, enter the following information:
- User Name: Your username (default root).
- Password: Your password (default public).
• When you have made these entries in the Cisco WCS Login page, click Submit.
Note: Some documented features may not function properly if you choose to use any
Web Browser other than Internet Explorer 6.0 on a Windows workstation.
Note: It is recommended that the Cisco WCS User Interface and Cisco WCS are
installed on different machines.