Filter
Top Products
5/26/05 Cisco 1000 Series Lightweight Access Point Part Numbers
OL-7426-03
About Cisco 1000 Series Lightweight Access Point Part NumbersCisco 1000 Series Lightweight Access Point Part Numbers
The Cisco 1000 Series lightweight access point includes one 802.11a and one 802.11b/g radio. The
Cisco 1000 Series lightweight access point is available in the following configurations:
• AIR-AP1010-A-K9, AIR-AP1010-C-K9, AIR-AP1010-E-K9, AIR-AP1010-J-K9, AIR-AP1010-N-K9,
and AIR-AP1010-S-K9 - AP1010 Cisco 1000 Series lightweight access point four high-gain
internal antennas, one 5 GHz external antenna adapter and two 2.4 GHz external antenna
adapters.
• AIR-AP1020-A-K9, AIR-AP1020-C-K9, AIR-AP1020-E-K9, AIR-AP1020-J-K9, AIR-AP1020-N-K9,
and AIR-AP1020-S-K9 - AP1020 Cisco 1000 Series lightweight access point with four high-gain
internal antennas, and no external antenna adapters.
• AIR-AP1030-A-K9, AIR-AP1030-C-K9, AIR-AP1030-E-K9, AIR-AP1030-J-K9, AIR-AP1030-N-K9,
and AIR-AP1030-S-K9 - AP1030 Cisco 1000 Series lightweight access point (Cisco 1030 remote
edge lightweight access point) with one 5 GHz external antenna adapter and two 2.4 GHz
external antenna adapters.
The Cisco 1000 Series lightweight access point is shipped with a color-coordinated ceiling mount base
and hanging-ceiling rail clips. You can also order projection- and flush-mount sheet metal wall
mounting bracket kits. The base, clips, and optional brackets allow quick mounting to ceiling or wall.
The Cisco 1000 Series lightweight access point can be powered by Power Over Ethernet
or by an Cisco
1000 Series Lightweight Access Point External Power Supply. The external power supply model is:
• AIR-PWR-1000 - Optional External 110-220 VAC-to-48 VDC Power Supply for any Cisco 1000
Series lightweight access point.
The Single Inline PoE injector model is:
• AIR-PWRINJ-1000AF - Optional Single 802.3af Inline Power over Ethernet Injector for any Cisco
1000 Series lightweight access point, powered by 90-250 VAC.
The projection and flush sheet metal wall mount bracket model is:
• AIR-ACC-WBRKT1000 - Optional sheet metal wall-mount bracket kit for any Cisco 1000 Series
lightweight access point. Includes one projection-mount and one flush-mount bracket per kit.
About Cisco 1000 Series Lightweight Access Point External and Internal Antennas
Cisco 1000 Series Lightweight Access Point External and Internal Antennas
The Cisco 1000 Series lightweight access point enclosure contains one 802.11a or one 802.11b/g radio
and four (two 802.11a and two 802.11b/g) high-gain antennas, which can be independently enabled or
disabled to produce a 180-degree sectorized or 360-degree omnidirectional coverage area.
Note that the wireless LAN operator can disable either one of each pair of the Cisco 1000 Series light-
weight access point internal antennas to produce a 180-degree sectorized coverage area. This feature
can be useful, for instance, for outside-wall mounting locations where coverage is only desired inside
the building, and in a back-to-back arrangement that can allow twice as many clients in a given area.
Note: Refer to Cisco WLAN Solution Supported Country Codes for the most recent
information on supported Regulatory Domains.
Note: Cisco 1000 Series lightweight access points must use the factory-supplied
internal or external antennas to avoid violating FCC requirements and voiding the
user’s authority to operate the equipment. Refer to FCC Statements for Cisco 1000
Series Lightweight Access Points for detailed information.