Filter
Top Products
viii
Cisco uBR924 Software Configuration Guide
OL-0337-05 (8/2002)
Preface
Purpose
Purpose
This configuration guide explains the initial and basic software configuration procedures for the
Cisco uBR924 cable access router. This guide contains procedures for configuring the
Cisco uBR924 router for both data only operation, as well as for voice and data operation. This guide
also describes how to set up basic security, the headend interface (CMTS-to-CM), and how to use ROM
monitor.
Organization
This guide is organized into the chapters and appendixes shown in Table 1, which also shows the changes
from the previous version of this guide:
Note For a complete list of changes in each Cisco IOS release, see the Release Notes that accompany that
release.
Document Conventions
This publication uses the following conventions:
Table 1 Organization
Chapter Title Description
Changes from the Previous
Release
Chapter 1Overview Provides an overview of the Cisco uBR924 cable
access router and its possible configurations.
Includes features added in
Cisco IOS Release 12.1(5)T.
Chapter 2 DOCSIS-Bridging
Configuration
Describes how to configure the router for its
default of DOCSIS-compliant bridging operation.
None.
Chapter 3 Advanced Data-Only
Configurations
Describes how to configure the router for various
data-only configurations such as routing operation
and IPSec encryption.
None.
Chapter 4 Voice over IP
Configurations
Describes how to configure the router for Voice
over IP (VoIP) traffic using either the H.323v2 or
SGCP/MGCP call control protocols.
None.
Appendix A Using Cisco IOS
Software
Describes the basics of using the Cisco IOS
command line interface (CLI).
None.
Appendix BUsing the Cable
Monitor Tool
Describes how to display diagnostic information
about the Cisco uBR924 cable access router using
any web browser.
None.
Appendix C Using the ROM Monitor Describes how to use the Cisco IOS ROM
monitor.
Minor changes on entering
ROMMON mode and returning
to normal mode.
Appendix D New and Changed
Commands Reference
Lists the commands that are new to the
CiscoIOS12.1T software releases.
Includes commands added in
Cisco IOS Release 12.1(5)T.