Filter
Top Products
A-12
Cisco uBR924 Software Configuration Guide
OL-0337-05 (8/2002)
Appendix A Using Cisco IOS Software
Useful Commands
show ip dhcp server statistics user EXEC Displays the contents of the router’s DHCP
database.
show ip interface user EXEC Displays the IP configuration and status for the
router’s Ethernet and cable interfaces.
show ip protocols user EXEC Displays the IP routing protocol parameters and
status.
show ip rip database user EXEC Displays the contents of the Routing Information
Protocol (RIP) database.
show ip route user EXEC Displays the contents of the router’s current IP
routing table.
show ip traffic user EXEC Displays statistics for the IP traffic sent through
the router.
show protocols user EXEC Displays the currently configured protocols for
each interface.
show running-config privileged EXEC Displays the active configuration.
show startup-config privileged EXEC Displays the configuration loaded into the router
at boot-up.
show version user EXEC Displays the Cisco uBR924 software and
hardware versions.
Table A-6 Useful Commands (continued)
Command Command Mode Purpose