Filter
Top Products
6-25
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Updating the Compaq Insight
Manager Agents
If you are using Compaq Insight Manager, you will need to update the Insight
Agents for this monitoring utility to support the new Smart Array 3200
Controller.
If you used SmartStart 4.22 or later to install the operating system on a new
Smart Array 3200 Controller installation or to upgrade your driver in an existing
installation, the agents were updated by SmartStart; you will not have to
manually update the agents.
If you did not use SmartStart 4.22 or later as part of your Smart Array 3200
Controller installation, you must manually update the Insight Agents. The
correct agents can be obtained from your local Compaq Reseller or authorized
Compaq Service Provider. Refer to the documentation included with Compaq
Insight Manager for the correct procedure for updating agents.
Installation of the Smart Array 3200 Controller is now complete. Reboot the
server to begin using the array controller.
SCO OpenServer 5
This section includes instructions for getting the latest driver and support
information for installing the driver. If you use SmartStart to install SCO
OpenServer 5 and drivers, you can skip this section; you do not need to create
the Extended Feature Supplement (EFS) diskettes.
If your system has an older SCO operating system, or if you are setting up a
new system with SCO OpenServer 5, Compaq recommends you use SmartStart
to upgrade your operating system. SmartStart is supplied with the server or may
be obtained from your local Compaq Reseller or authorized Compaq Service
Provider.