Filter
Top Products
4-3
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: E-CH04.DOC Last Saved On: 11/30/98 5:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Running the System
Configuration Utility
To run the System Configuration Utility:
1. Place the Compaq SmartStart and Support Software CD in the server
CD-ROM drive.
or
Place the System Configuration Utility Diskette 1 in the server floppy
drive.
2. Reboot the server.
3. During the boot process, several messages appear. Among these are a
notice that one or more Smart Array 3200 Controllers were detected in
option slots and a recommendation to run the System Configuration
Utility.
4. Press F1 to resume booting, if prompted.
5. If you are using the Compaq SmartStart and Support Software CD, select
Run the System Configuration Utility from the Main Menu screen.
6. If you are given a choice of Auto Configuration, choose Yes. The system
loads configuration files for all detected devices.
7. In the Configuration Complete screen, choose Review or Modify
Hardware Settings.
8. At the next screen, Steps In Configuring Your Computer, select Step 3:
View or Edit Details.
9. Set the Smart Array 3200 Controller(s) configuration parameters at the
View Or Edit Details screen. Scroll down to the option slot for the first
Smart Array 3200 Controller and edit each parameter according to the
following configuration information.