Filter
Top Products
6-38 Installing the Operating System Drivers
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3. /A:[adapter index] [unit parameters]
This is a standard command line switch that causes the driver to modify
its behavior toward adapters.
[adapter index] is a number used to identify a controller. The index is
based on “0” for the lowest controller order number associated with the
adapter controlled by this ADD. The index increases by one for each
controller in the system as you move up the controller configuration
order.
Example: A system that has three adapters controlled by the
CPQARRAY.ADD, with the lowest configured adapter the secondary
controller.
Table 6-1
Controller Index Configuration Order
Controller Order Adapter Index
20
31
52
[unit parameters] This ADD only supports the /I parameter to ignore a
controller. The following unit parameter is available: /I