Filter
Top Products
6-12 Installing the Operating System Drivers
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
11. Use the Insert key to resynchronize this partition. You must
resynchronize before deleting the partition. Allow INSTALL to
resynchronize this partition. If warning messages indicate the selected
partition contains an already-defined volume, select No (do not rename
the volume) and press Esc. Since you will delete this partition, there is
no reason to salvage the volume. Proceed with deleting the partition
table.
12. From the INSTALL.NLM Disk Options menu, select the Partition Tables
option. In the INSTALL.NLM Available Disk Drives menu, select the
previously failed logical drive, which has now been repaired. The device
information was recorded in Step 1. For example:
NWPA: [V503-A2-D1:0] Compaq SMART-2 Slot 8 Disk 2 NFT
Select Delete Partition. INSTALL may display several error messages.
Since you will delete this partition, do not update any Volume Definition
Table information. Continue until the partition has been deleted.
If INSTALL reports that it cannot delete the partition because another
process has it locked, load MONITOR and look at the System Resources
option to determine which NLM has locked the device. If it is
MONITOR.NLM, you will need to unload MONITOR and any other
NLMs that have the partition locked. After you create the partition and
volume information, reload those NLMs.
13. Create the partition on the same logical drive.
14. Return to the Disk Options Mirroring menu. Select the previously
mirrored NetWare 386 Partition number (recorded in Step 2).
NWPA: [V503-A2-D1:0] Compaq SMART-2 Slot 8 Disk 2 NFT
15. Press Insert for a list of partitions available to remirror. Select the partition
associated with the repaired device (Step 1). This alerts NetWare to
resynchronize the mirrored partitions.
A console message indicates successful completion of the
resynchronization step.