Compaq 3200 Network Card User Manual


 
G-1
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: N-APPG.DOC Last Saved On: 12/8/98 11:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Appendix G
Upgrading from the SMART-2
and SMART SCSI Array
Controllers
End users of the original Compaq SMART-2 or SMART SCSI Array
Controllers can consider upgrading to the new Smart Array 3200 Controller.
This appendix provides upgrade instructions for moving arrayed drives from
either the SMART or SMART-2 (SMART-2/E, SMART-2/P, SMART-2SL,
and SMART-2DH) Controllers to the Smart Array 3200 Controller. All end user
data and configuration information will be retained after the upgrade process.
IMPORTANT: Array configuration information is automatically transferred
during the upgrade process. However, this is a one-way process. After
upgrading to the Smart Array 3200 Controller, a manual reconfiguration
procedure is required to move the drives and data back to the SMART or
SMART-2 Controller.
IMPORTANT: The upgrade procedure described below applies only to
moving drives from SMART or SMART-2 controllers to the Smart Array 3200
Controller. Data will NOT be preserved if drives are moved from a Fast SCSI-2
Controller or a Fast-Wide SCSI-2 Controller to a SMART, SMART-2, or Smart
Array 3200 Controller.
To upgrade your system by replacing the SMART or SMART-2 SCSI Array
Controller with a new Smart Array 3200 Controller, perform the following steps
in the order indicated.
1. Back up all affected drives. This is a safety precaution. If done properly,
this upgrade procedure will not affect the arrayed data or drive location.
2. Upgrade your operating system device driver to the new Smart Array
3200 Controller driver. The new drivers have been optimized to support
the latest features and capabilities of the Smart Array 3200 Controller.
The driver upgrade process is operating system-dependent. See the
Readme file on the Compaq SmartStart and Support Software CD for
information on specific operating system drivers.