Filter
Top Products
5-14 Running the Array Configuration Utility
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: F-CH05.DOC Last Saved On: 12/7/98 1:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
5. Click the Next button at the bottom of the screen. A screen similar to the
following figure is displayed.
Figure 5-10. Expansion wizards - Logical Drive screen
6. Click the Create Logical drive button.
7. Set the fault tolerance, array accelerator, stripe size, and size for logical
drive 2.
8. Click the Done button twice to return to the main screen.
9. At the main screen, select Controller, Save Configuration from the menu
bar. This saves the new settings for logical drive 2 and starts the capacity
expansion process.
NOTE: Logical drive 2 will not be accessible until the capacity expansion
process has completed on logical drive 1.
CAUTION: In the event of power loss, capacity expansion
process information is temporarily stored in the Array Accelerator
memory. To prevent the loss of data in the expanding logical
drive, do not interchange Smart Array 3200 controllers or Array
Accelerator boards during a capacity expansion process.