Filter
Top Products
6-15
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Microsoft Windows NT 3.51 and 4.0
This section includes instructions for installing the initial driver for a new Smart
Array 3200 Controller installation or for upgrading the driver in an existing
Windows NT server/Smart Array 3200 Controller system. If you used
SmartStart to install Windows NT and drivers on a new server, you do not need
to make the Support Software Diskette (SSD) utility diskettes. Skip this section.
NOTE: Windows NT supports using the Compaq Array Configuration Utility to
reconfigure your drive arrays online. However, the first use of the Array
Configuration Utility on a Windows NT server must be offline to initially set up
at least one array. After that, the utility can be used online to change the array
configuration.
Materials Needed
To install the Smart Array 3200 Controller Windows NT driver on your server,
you will need:
■ Compaq SmartStart and Support Software CD (supplied in the Smart
Array 3200 Controller option kit)
■ Blank diskettes
■ Access to a server or workstation with a bootable CD-ROM drive. This
may be the system in which you are installing the Smart Array 3200
Controller.