Filter
Top Products
6-40 Installing the Operating System Drivers
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Updating the Compaq Insight
Manager Agents
If you are using Compaq Insight Manager, you will need to update the Insight
Agents to support the new Smart Array 3200 Controller.
If you used SmartStart 4.22 or later to install the operating system on a new
Smart Array 3200 Controller installation or to upgrade your driver in an existing
installation, the agents were updated by SmartStart. You will not have to
manually update the agents.
If you did not use SmartStart 4.22 or later as part of your Smart Array 3200
Controller installation, you must update the Insight Agents manually. The
correct agents can be obtained from your local Compaq Reseller or authorized
Compaq Service Provider. Refer to the documentation included with Compaq
Insight Manager for the correct procedure for updating agents.
Installation of the Smart Array 3200 Controller is complete. Reboot the server
to begin using the array controller.
Banyan VINES 6.x, 7.x, and 8.x
Use the instructions in this section to install the initial driver for a new Smart
Array 3200 Controller installation or to upgrade the driver in an existing Banyan
VINES 6.x, 7.x, and 8.x Server/Smart Array 3200 Controller system.
Materials Needed
To install the Banyan VINES driver for the Smart Array 3200 Controller on
your server, you will need:
■ Compaq SmartStart and Support Software CD (supplied in the Smart Array
3200 Controller option kit)
■ Blank diskettes
■ Access to a server or workstation with a bootable CD-ROM drive. This
may be the system in which you are installing the Smart Array 3200
Controller.