Filter
Top Products
3-5
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: D-CH03.DOC Last Saved On: 12/7/98 1:19 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Running Options ROMPaq
Options ROMPaq updates the firmware on Compaq options. Since it is difficult
to determine when to update the firmware, Compaq recommends that you run
the latest Options ROMPaq on all Smart Array 3200 Controllers whenever new
versions are released.
The Smart Array 3200 Controller firmware version on the Compaq SmartStart
and Support Software CD has already been installed; you do not need to update
immediately. However, if you have older Smart Array 3200 Controllers or other
Compaq options (such as drives), create the Options ROMPaq diskettes and
make sure the firmware on these options is the latest version.
To run Options ROMPaq:
1. Place the Options ROMPaq diskette 1 in the server diskette drive.
2. Boot the server by turning on the power.
3. Press Enter at the Welcome screen.
4. At the Select A Device screen, select:
ALL COMPAQ Smart Array 3200 Controller(s)
from the list of programmable devices. Press Enter.