Filter
Top Products
2-2 Guidelines for Making Changes to Current Installation
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: C-CH02.DOC Last Saved On: 12/7/98 8:33 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table 2-1
Supported Compaq Hard Drives
18.2-GB Ultra2 10k-II Hot-Plug 18.2-GB Wide-Ultra2 10k-II Non-Hot-Plug
18.2-GB Ultra2 Hot-Plug 18.2-GB Wide-Ultra2 Non-Hot-Plug
18.2-GB Wide-Ultra 10k-II Hot-Plug 18.2-GB Wide-Ultra 10k-II Non-Hot-Plug
18.2-GB Wide-Ultra Hot-Plug
9.1-GB Wide-Ultra2 10k-II Hot-Plug 9.1-GB Wide-Ultra2 10k-II Non-Hot-Plug
9.1-GB Wide-Ultra2 Hot-Plug 9.1-GB Wide-Ultra2 Non-Hot-Plug
9.1-GB Wide-Ultra 10k-II Hot-Plug 9.1-GB Wide-Ultra 10k-II Non-Hot-Plug
9.1-GB Wide-Ultra Hot-Plug 9.1-GB Wide-Ultra Non-Hot-Plug
4.3-GB Wide-Ultra2 10k-II Hot-Plug 4.3-GB Wide-Ultra2 10k-II Non-Hot-Plug
4.3-GB Wide-Ultra2 Hot-Plug 4.3-GB Wide-Ultra2 Non-Hot-Plug
4.3-GB Wide-Ultra 10k-II Hot-Plug 4.3-GB Wide-Ultra 10k-II Non-Hot-Plug
4.3-GB Wide-Ultra Hot-Plug 4.3-GB Wide-Ultra Non-Hot-Plug
2.1-GB Wide-Ultra SCSI Hot-Plug 2.1-GB Wide-Ultra SCSI Non-Hot-Plug
■ Drives should be of the same capacity to provide the greatest storage space
efficiency when grouped in the same drive array.
■ Except on hot-plug drives in ProLiant servers and storage systems, you must
manually set the SCSI ID on each drive to a unique value in the range 0 to 6 or
8 to 15 for each SCSI bus (ID7 is reserved for the controller). Consult the
documentation that came with the drive for instructions on setting the SCSI ID.