Filter
Top Products
G-7
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: N-APPG.DOC Last Saved On: 12/8/98 11:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
7. Reconnect all internal and external drive cables. Pay close attention to
the port numbers as noted in Step 5.
8. Turn on the server and run the Compaq System Configuration Utility.
This configuration utility recognizes the Smart Array 3200 Controller
and allows you to change parameters such as controller order and
interrupt number, if needed. You will not see logical drive information
with this utility since Smart Array 3200 Controller logical drives are
configured with the Compaq Array Configuration Utility. Save the
configuration and reboot the server.
You can run the Array Configuration Utility to see the configuration of
your logical drive(s), look at fault-tolerance level, and so on. However, it
is not necessary since your configuration information is automatically
preserved.
After completing these steps, the upgrade process is complete. You can now use
the Smart Array 3200 Controller.