Filter
Top Products
D-6 Things You Should Know
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: K-APPD.DOC Last Saved On: 12/7/98 1:37 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Migrating to/from Other Controllers
The table below indicates what actions, if any, are required when migrating
from one array controller type to another.
NOTE: Compaq recommends that you should back up data any time you
move drive arrays or change your configuration.
Table D-2
Migrating to/from Other Controllers
TO SMART-1 SMART-2/E SMART-2/P SMART-2SL SMART-2DH 3100ES
and
3200
FROM
SMART-1 X X X X X X
SMART-2/E BU/Restore X X X X X
SMART-2/P BU/Restore X X X X X
SMART-2SL BU/Restore FW Upgrade FW Upgrade X X X
SMART-2DH BU/Restore FW Upgrade FW Upgrade X X X
3100ES
3200
BU/Restore FW Upgrade FW Upgrade FW Upgrade FW Upgrade X
LEGEND:
X: No action required; backup of data is recommended prior to migrating to another controller.
BU/Restore: Backup and restore of data is mandatory to prevent data loss.
FW Upgrade: Destination controller should be upgraded to firmware version 3.04 or higher, using Options
ROMPaq before attaching drives.