Filter
Top Products
2-5
Paper Handling
Control Panel Operations
: This operation has no connection with this condition.
N/A : The condition does not apply because this operation is executed before powering
on.
Operation Required Conditions
*1
Required Action
Ready Printing
*2
Fault
Load continuous forms paper Not printing On Press FF/Load.
Load single sheet paper Not printing On Press FF/Load if single sheet
load is switched from AUTO
to MANUAL in Set-Up mode.
Feed paper a page Not printing Off Press FF/Load.
Feed paper a line Not printing Off Press LF.
Advance perforation to tear bar Not printing Off
Press
Pause
if the TEAR
option is switched from AUTO
to MANUAL in Set-Up mode,
or
press FF/Load.
Advance paper for viewing Not printing Off
Press
Pause
if the TEAR
option is switched from AUTO
to MANUAL in Set-Up mode.
Return paper to previous position Not printing Off
Press
Pause
if the TEAR
option is switched from AUTO
to MANUAL in Set-Up mode,
or
press FF/Load.
Eject single-sheet paper Not printing Off Press FF/Load or Park or turn
the printer off and on again.
Unload continuous-forms Not printing Off Press Park.
paper
*3
Pause printing On Printing Off Press Pause.
Resume printing Blinking Not printing Off Press Pause.
Resume printing after a fault Off Not printing On Clear error and press Pause.
Resume printing after paper-out Off Not printing On Load paper.
Place printer in Ready state Off Not printing Off Press Pause.
Place printer in pause state On Off Press Pause.
Enter Normal mode N/A N/A N/A Turn power on without
pressing any buttons
Printing test N/A N/A N/A Turn power on while
pressing FF/Load.