Filter
Top Products
2-17
Paper Handling
5. For both forms tractors 2, release the tractor locking levers 5 by pulling them up. Open
the tractor paper holders 6.
Positioning the Tractor Using the Tractor Guide
6. Position the right forms tractor (as seen from the rear of the printer) in accordance with
the Note below. Push the right locking lever down to secure the tractor. Center the
middle forms support.
Note: The tractor guide 7 can be found below the right forms tractor, as seen from the
back. This tractor guide is a short inch-based ruler graduated in 10 columns per
inch. Use this ruler to help position the tractor. When the paper edge is
positioned to the leftmost line, the left margin is 12 mm (0.5 inch) including the
perforation area.
7. Once the right forms tractor is positioned, lock it by pushing down its locking lever.
12 mm
7
6
5