Filter
Top Products
2-8
Paper Handling
Overview of Paper Operations
The following levers and buttons are used in paper handling:
Paper select lever 1 at the top left corner of the printer
Paper thickness lever 2 at the top right corner of the printer
All buttons 6 on the control panel 3 (Primary and alternative functions are labelled
respectively above and under each button.)
The following figure shows the location of each lever, indicators, and buttons:
Courier 10
Draft
HSDraft
Comp. 17
Nimb. PS
HiDraft
Soft Ctrl.
M1
M2
Fault
DEC
PPX24
Set-up/Quit
Top
Exit/Save
Ready
EP2
M2
M1
Paper select lever 1 Font indicators 4
Paper thickness lever 2 Macro indicators 5
Control panel 3 Buttons 6
Printer Levers and Buttons
The following table summarizes the use of levers and buttons in paper handling. More
detailed information is provided later in this chapter.
Caution: To load or feed paper, the printer must be:
In the Ready state but not receiving or printing data
In the Pause state
1
2
3
5
4
6