Filter
Top Products
vii
4 - Using Set-Up Mode
This chapter describes how to change the printer’s optional settings, such as print features,
hardware options, and top-of-form. Most settings only affect print features such as the type
style and page format. Note that certain settings directly affect hardware and software
compatibility. Refer to this chapter as indicated in the part Installation Guide or as
required.
5 - Maintenance
This chapter explains basic maintenance procedures for this printer.
6 - Trouble-Shooting
This chapter describes problem-solving techniques. Before you contact your dealer for
help, check the list of problems and solutions provided in this chapter.
At the end of this guide, you will find several appendices, a glossary, and an index.
Appendix A gives order numbers for printer supplies and options, explaining how to install
them. Other appendices provide additional technical information about the printer.
Notes, Cautions and Warnings
The text contains three different types of annotation which should always be read.
Note: This NOTE annotation provides you with additional information, or indicates
where you can find it.
Caution: This CAUTION annotation should catch your attention, advising you of a
particular situation/problem which may occur/be avoided as a result of a
certain sequence of operations. It may also contain a reminder to execute a
particular operation.
Warning: This WARNING annotation indicates a specific procedure which must be strictly
observed. Failure to comply with the instructions given may result in injury to
the operator and/or damage to the printer.