Filter
Top Products
4-5
Using Set-Up Mode
Overview of the Set-Up Mode
When you enter the Set-Up mode, the following <FUNCTIONS> menu is printed:
<FUNCTIONS>
MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-
ACCESS SAVE&EXIT
The following table summarizes the purpose of each function.
Set-Up Mode Functions
Function Purpose
MACRO 1 and MACRO 2 Assigns print features to MACRO 1 and MACRO 2.
PRINT Prints the Printer Configuration.
INSTALL Changes the Set-Up menu language, computer interface, and
paper feed control options.
ADJUST Changes the top-of-form fine adjustment options.
TESTS Runs the printing test and hex dumps.
RCALL-FACT Resets factory settings in MACRO 1, MACRO 2, INSTALL,
and ADJUST.
MENU-ACCES Restricts access to Set-Up functions from the control panel.
SAVE&EXIT Exits the Set-Up mode and saves any changes made in the
Set-Up mode.
To select a function from the <FUNCTIONS> menu:
1. Repeatedly press the button or the button to position the red cursor on the
plastic print guide under the function you require.
2. Press the button or the button to select the function. If the function has options
and values, the printer prints the first option and its values. The MACRO 1, MACRO 2,
INSTALL, ADJUST, TESTS, and MENU-ACCES functions contain options that have
selectable values. The other functions have neither options nor values.