Filter
Top Products
4-6
Using Set-Up Mode
The first four Macro 1 options and their values are shown below. Options are shaded
and skipped when they are not objects of selection because of the preceding option
setting.
<PROTOCOL>
DEC PPL2 IBM PPX24EPSON-ESCP AUTO PORT DEPND
<PRTCL SERL>
DEC PPL2__ IBM PPX24EPSON-ESCP
<PRTCL PARL>
DEC PPL2 IBM PPX24EPSON-ESCP
<FONT>
DRAFT HIDRAFT HI-IMPACTCOURIER PICA PRESTIGE COMPRESSED BOLDFACE
TIMELESS
NIMBUS-SAN OCR A OCR-B
3. Pressing and holding down the or button prints options and their current values
letting you skip selection of values so that you can reach the desired option quickly.
<FUNCTIONS>
MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-ACCESS SAVE&EXIT
<PROTOCOL> PORT DEPND
<PRTCL SERL> DEC PPL2
<PRTCL PARL> EPSON-ESCP
<FONT> DRAFT
<HORZ PITCH> 10 CPI
<VERT PITCH> 6 LPI
<VERT PITCH>
2 LPI 3 LPI 4 LPI 6 LPI 8 LPI 12 LPI 1 LPCM 2 LPCM 4 LPCM
The current option and its values are reprinted when the or button is released.
Options with Pre-determined Values
For some options, you can choose among a limited set of pre-determined values.
To select such a value:
1. Repeatedly press the button or the button to position the red cursor on the
plastic print guide under the value you require.
2. Press the button to select the value. The printer prints the next option and its values.