Filter
Top Products
4-30
Using Set-Up Mode
Changing Menu Access Options
You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-
Up options.
MENU ACCESS Option and Values
Overprinted values are the factory settings.
MENU ACCESS
Option Values Description
<MENU-ACCES> Specify the type of access to the Set-Up functions
from the control panel or from the <FUNCTIONS>
menu.
ALL FUNC All functions are accessible.
MACRO ONLY Only MACRO 1 and MACRO 2 functions are accessible
from the <FUNCTIONS> menu.
NO ACCESS Set-Up mode is inaccessible.
NO PANEL Font, Macro, and Protocol buttons are disabled even
in Normal mode. Set-Up mode is also inaccessible.
Note:
You can return to the All Functions Accessible mode
by turning the printer on while pressing the Park,
LF
and FF/Load buttons at the same time. The
printer enters the Set-Up mode with this operation.
Exiting and Saving
This section describes how to exit the set up mode while saving any changes you have
made.
To exit the Set-Up mode with the settings saved, select the SAVE&EXIT function and press
the button or the button.
Any settings changed while in the Set-Up mode are saved as the new power-on defaults for
the printer. The new defaults remain active until you change them again.
Caution: To temporarily use your changes, press the Set-Up/Quit button. These changes
are lost at the next power-off.