Filter
Top Products
2-9
Paper Handling
Levers and Buttons Used for Paper Handling
Lever/Button Purpose Action
FF/LOAD
Form feed Press FF/Load to execute a form feed.
Continuous forms are fed forward by one
page. Single sheets are ejected.
Load paper Press FF/Load to feed paper to the top of
form position.
LF Line feed Press LF to feed paper forward by one line.
Park Unload forms Press Park to retract continuous forms to
the park position.
Set-Up/Quit + Top Press Set-Up/Quit and Top at the same time
to enter TOF Adjustment mode where the
paper loading position can be adjusted.
Press the button to feed paper forward
by 1/60 inch in TOF Adjustment mode.
Press the button to feed paper backward
by 1/60 inch in TOF Adjustment mode.
Exit/Save Save TOF value Press Exit/Save to permanently store the
TOF position adjusted by the button and
the button in TOF Adjustment mode.
Pause Press Pause to advance the forms
perforation to the tear bar. Tear off the
forms, then press Pause again to return the
forms to the previous position.
Paper select lever * Select paper path Move the paper select lever forward for
single sheets.
Move the paper select lever backward for
continuous forms.
Paper thickness lever Select the number corresponding to the
number of copies (including the original).
Vary the setting upward or downward
(including A to D) to optimize printing.
Select D when replacing ribbon or clearing
a paper jam.
* The following graphics are engraved on the casing.
Continuous forms
Single sheets
Enter Top-of-Form
(TOF) Adjustment
mode
Increase TOF value by
1/60 inch
Decrease TOF value by
1/60 inch
Advance forms to the
tear bar when forms are
at the Top-of-Form
(TOF) position..
Adjust for paper
thickness or number of
copies