Compaq M700 Personal Computer User Manual


 
1-4 Getting Started
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Jennifer Hale Saved by: jabercrombie Saved date: 06/04/99 10:25 AM
Part Number: 103182-001 File name: ch01.doc
Turning the Computer On
To turn the computer on, slide the power switch and release it.
If the computer is only connected to external AC power, the
computer will start up automatically when you plug it in.
Setting Up the Software
When you begin software setup, online instructions guide you
through the setup process.
IMPORTANT: After you begin software setup, you must complete the
entire process. Make sure the computer is plugged into an external
power source to ensure that software setup is not interrupted.
CAUTION: To prevent file corruption and ensure the correct
software drivers are installed
Do not dock the computer in a docking station.
Do not turn off or unplug the computer or remove a drive during
software setup.