Compaq M700 Personal Computer User Manual


 
5-4 Power Management
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Jennifer Hale Saved by: jabercrombie Saved date: 06/02/99 11:35 AM
Part Number: 103182-001 File name: ch05.doc
When Suspend is initiated, the
Screen clears.
System-on light blinks.
NOTE: During Suspend the screen is blank. However, unlike a
powered-off state, the computer turns back on when the suspend
button is pressed.
Exiting Suspend
If Suspend was initiated because the timeout expired, exit by
pressing the suspend button once or sliding the power switch.
If Suspend was initiated because Hibernation has been
disabled and the system reaches a critical low battery
condition, exit Suspend in one of these ways:
Connect the computer to the external AC Adapter and
connect to external power.
Connect the computer to the external AC Adapter
connected to the optional Automobile Power
Adapter/Charger or optional Aircraft Power Adapter.
Dock the computer in the optional desktop expansion base
or convenience base.
Replace the battery pack, then press the suspend button or
slide the power switch.
When you exit Suspend, the computer
System-on light stops blinking and remains lighted.
Returns previously displayed information to the screen.
NOTE: When you exit Suspend, your information returns to the
screen at the point where Suspend was initiated. No information is
lost provided you do not lose power while the computer is in
Suspend.
Hibernation
Hibernation is a safeguard condition in which all information in
system memory is saved to the hard drive and power to the
computer is turned off. When you resume your work, your
information is returned to the screen exactly where you left off.