Filter
Top Products
Dell PowerConnect 28xx Systems User Guide 113
Figure 7-15. Dynamic Address Table
•
Address Aging (10-630)
— Specifies the amount of time the MAC Address remains in the
Dynamic
Address Table
before it is timed out if no traffic from the source is detected. The default value is
300 seconds.
•
Interface
— Specifies the interface for which the table is queried. There are two interface types from
which to select.
–
Port
— Specifies the port numbers for which the table is queried.
–
LAG
— Specifies the LAG for which the table is queried.
•
MAC Address
— Specifies the MAC address for which the table is queried.
•
VLAN ID
— Specifies the VLAN ID for which the table is queried.
•
Address Table Sort Key
— Specifies the means by which the Dynamic Address Table is sorted.
Redefining the Aging Time
1
Open the
Dynamic Address Table
.
2
Define the
Aging Time
field.
3
Click Apply Changes.
The aging time is modified, and the device is updated.