Filter
Top Products
166 Dell PowerConnect 28xx Systems User Guide
show system mode
show ip interface
show interfaces configuration
show interfaces status
show interfaces port-channel
show vlan
show interfaces switchport
show spanning tree
show bridge multicast address-table
show ip igmp snooping groups
show dot1x
show dot1x users
show interfaces counters
show users
show sessions
show logging file
show logging
If you specify the memory keyword, the show tech-support command displays the output of the
following commands:
flash info (dir if existed, or flash mapping)
buffers info (like print os buff)
memory info (like print os mem)
proc info (like print os tasks)
Command: snmp-server community
Use the snmp-server community command to set up the community access string to permit access to
the Simple Network Management Protocol command. Use the no form of this command removes the
specified community string.
snmp-server community
community
[ro | rw | su] [
ipv4-address
]
no snmp-server community
community
[
ipv4-address
]
Syntax Description
•
community
— Community string that acts like a password and permits access to the SNMP protocol.
•
ro
— Specifies read-only access (Default)