Filter
Top Products
Dell PowerConnect 28xx Systems User Guide 63
Defining Device IP Addresses
The IP Addressing page contains a link to the IP Interface Parameters page that is used to assign the
device IP address, subnet mask and default gateway, and for enabling or disabling DHCP.
To open the IP Addressing page, click System
IP Addressing in the tree view.
Defining IP Interface Parameters
To open the
IP Interface Parameters page, click System IP Addressing IP Interface Parameters in
the tree view.
Figure 6-6. IP Interface Parameters
•
DHCP
— The DHCP client can be enabled to acquire the network configuration dynamically. The
DHCP default value is Disable. This field enables the DHCP client.
•
IP Address
— Specifies the IP Address currently assigned to the device.
•
Subnet Mask
— Specifies the subnet mask of the IP Address, currently assigned to the device.
•
Default Gateway
— Specifies the Default Gateway Address, currently assigned to the device.
Setting static IP Interface parameters:
1
Open the
IP Interface Parameters
page
.
2
Set the
IP Address
,
Subnet Mask
and
Default Gateway
.
3
Click
Apply Changes
.
The static interface parameters are set and the device is updated.