Filter
Top Products
134 Dell PowerConnect 28xx Systems User Guide
Enabling IGMP Snooping on the Device
1
Open the
Multicast Global Parameters
page.
2
Select
Enable
in the
IGMP Snooping Status
field.
3
Click
Apply Changes
.
IGMP Snooping is enabled on the device.
Adding Bridge Multicast Address Members
The
Bridge Multicast Group
page
displays the ports and LAGs attached to the Multicast service group
in the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or
LAGs joined the Multicast group. Ports can be added either to existing groups or to new Multicast
service groups. The Bridge Multicast Group
page
permits new Multicast service groups to be created.
The
Bridge Multicast Group
page
also
assigns ports to a specific Multicast service address group.
To open the Bridge Multicast Group
page, click Switch Multicast Support Bridge Multicast
Group in the tree view.
Figure 7-27. Bridge Multicast Group
•
VLAN ID
— Identifies a VLAN and contains information about the Multicast group address.
•
Bridge Multicast Address
— Identifies the Multicast group MAC address/IP address.
•
Remove
— When selected, removes a Bridge Multicast address.
•
Ports
— Port that can be added to a Multicast service.
•
LAGs
— LAGs that can be added to a Multicast service.