Filter
Top Products
40 Dell PowerConnect 28xx Systems User Guide
Figure 4-1. Installation and Configuration Flow
Management Modes
The device can be run in Managed or Unmanaged mode. By default, the device is in Unmanaged mode.
These modes are described below:
•
Managed Mode
— In this mode:
– Switch can be managed through the web interface.
– Managed Mode LED is ON.
– Device uses the saved running configuration (if it exists) or the default configuration.
Connect Device and
Console
Power On
Suspend
Bootup
Yes
Press Esc
Startup Menu (Special
Functions)
Reboot
No
Loading Program from
flash to RAM
Enter Wizard
Yes
No
Initial Configuration: IP
Address, Subnet mask,
Users Basic Security
Configuration
Wizard Configuration
Process
Advanced Configuration: IP
Address from DHCP
Standard
Device
Installation
Advanced
Device
Installation
Hardware
Setup