Filter
Top Products
66 Dell PowerConnect 28xx Systems User Guide
Figure 6-8. Optical Transceiver Diagnostics
The Optical Transceiver Diagnostics page contains the following fields:
•
Port
— The port to which the fiber cable is connected.
•
Temperature
— The temperature (in Celsius) at which the cable is operating.
•
Voltage
— The voltage at which the cable is operating.
•
Current
— The current at which the cable is operating.
•
Output Power
— The rate at which the output power is transmitted.
•
Input Power
— The rate at which the input power is transmitted.
•
Transmitter Fault
— Indicates if a fault occurred during transmission.
•
Loss of Signal
— Indicates if a signal loss occurred in the cable.
•
Data Ready
— The transceiver has achieved power up and data is ready.
Displaying Optical Transceiver Diagnostics Test Results Table
1
Open the
Optical Transceiver Diagnostics
page.
2
Click
Show All
.
•
The test is run and the Virtual Cable Test Results Table opens.
Clicking
Show All
opens the
Optical
Transceiver Diagnostics Table
.
The Optical Transceiver Diagnostics Table contains the following columns: