Filter
Top Products
Dell PowerConnect 28xx Systems User Guide 67
•
Port
— The port to which the fiber cable is connected.
•
Temperature
— Internally measured transceiver temperature.
•
Voltage
— Internally measured supply voltage.
•
Current
— Measured TX bias current.
•
Output Power
— Measured TX output power in milliwatts.
•
Input Power
— Measured RX received power in milliwatts.
•
TXTransmitter Fault
— Transmitter fault.
Finisair transceivers do not support the transmitter fault diagnostic testing.
•
LOSLoss of Signal
— Loss of signal.
•
Data Ready
— The transceiver has archived power up and data is ready.
•
N/A
— Not Available, N/S - Not Supported, W - Warning, E - Error.
Fiber Optic analysis feature works only on SFPs that support the digital diagnostic standard SFF-4872.