Filter
Top Products
Dell PowerConnect 28xx Systems User Guide 163
•
prefix-length
—Range: 8-30
•
default-gateway
ip-address
—Valid IP address
Defaults
No IP address is defined for interfaces
Command Modes
Interface Configuration VLAN mode.
User Guidelines
• Assigning an IP address to an interface does not disable L2 protocols, such as STP.
• Defining a static IP address on an interface implicitly removes the DHCP client configuration on the
interface.
• Interface context may be VLAN 1 only
Examples
switch(config)> interface vlan 1
switch(config-if)> ip address 131.108.1.27 255.255.255.0 default-gateway
131.108.1.1
Command: ping
Use the ping command to send ICMP echo request packets to another node on the network.
ping {
ip-address
|
hostname
} [size
packet_size
] [count
packet_count
] [timeout
time_out
]
Syntax Description
•
ip-address
— IP address to ping.
•
hostname
— Hostname to ping.
•
packet_size —
Number of bytes in a packet. The default is 56 bytes. The actual packet size will be
eight bytes larger than the size specified because the switch adds header information.
•
packet_count
— Number of packets to send, from 1 to 65535 packets. The default is 4 packets. If 0 is
entered it pings until stopped.
•
time_out
— Timeout in milliseconds to wait for each reply, from 50 to 65535 milliseconds. The default
is 2000 milliseconds.
Parameters range
•
hostname
— 1 - 158 characters (Max label size: 63)
•
packet_size
— IPv4: 56 - 1472