Filter
Top Products
Dell PowerConnect 28xx Systems User Guide 95
–
None
— No authentication method is used to authenticate the port.
–
RADIUS
— Port authentication is performed using the RADIUS server.
–
RADIUS, None
— Port authentication is performed first using the RADIUS server. If the port is
not authenticated, then no authentication method is used, and the session is permitted.
•
Guest VLAN
— Specifies whether the Guest VLAN is enabled on the device. The possible field values
are:
–
Enable
— Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled, the
unauthorized port automatically joins the VLAN selected in the VLAN List field.
–
Disable
— Disables . This is the default.
•
VLAN List
— When Guest VLAN is enabled, this field specifies which VLAN the guest will belong to.
•
Interface
— Contains an interface list.
•
User Name
— The user name as configured in the RADIUS server.
•
Admin Interface Control
— Defines the port authorization state. The possible field values are:
•
Current Interface Control
— The currently configured port authorization state.
•
Guest VLAN
— Specifies whether the Guest VLAN is enabled on the interface.
•
Periodic Reauthentication
— Reauthenticates the selected port periodically, when enabled. The
reauthentication period is defined in the
Reauthentication Period (300-4294967295)
field.
•
Reauthentication Period (300-4294967295)
— Indicate the time span in which the selected port is
reauthenticated. The field value is in seconds. The field default is 3600 seconds.
•
Reauthenticate Now
— Permits immediate port reauthentication, when selected.
•
Authentication Server Timeout (1-65535)
— Defines the amount of time that lapses before the
device resends a request to the authentication server. The field value is in seconds. The field default is
30 seconds.
•
Resending EAP Identity Request (30-65535)
— Defines the amount of time that lapses before EAP
request are resent. The field default is 30 seconds.
•
Quiet Period (0-65535)
— The number of seconds that the device remains in the quiet state following
a failed authentication exchange. The possible field range is 0-65535. The field default is 60 seconds.
•
Supplicant Timeout (1-65535)
— The amount of time that lapses before EAP requests are resent to
the user. The field value is in seconds. The field default is 30 seconds.
•
Max EAP Requests (1-10)
— The total amount of EAP requests sent. If a response is not received after
the defined period, the authentication process is restarted. The field default is 2 retries.
Displaying the Port Based Authentication Table
1
Display the
Port Based Authentication
page.
2
Click
Show All
.
The
Port Based Authentication Table
opens: