Filter
Top Products
116 Configuring System Information
www.dell.com | support.dell.com
Defining SNTP Authentication Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Authentication
page.
The following is an example of the CLI commands:
Defining SNTP Servers
You can enable SNTP servers, as well as add new SNTP servers, from the
SNTP Servers
page.
To open the
SNTP Servers
page, click
System
→
SNTP
→
Servers
in the tree view.
Table 6-21. SNTP Authentication CLI Commands
CLI Command Description
sntp authenticate
Defines authentication for received Simple
Network Time Protocol (SNTP) traffic from
servers.
sntp trusted key
Authenticates the identity of a system to which
SNTP will synchronize.
sntp authentication-key
number
md5
valu
e
Defines an authentication key for SNTP.
console(config)# sntp authentication-key 8 md5 Calked
console(config)# sntp trusted-key 8
Console(config)# sntp authenticate