Dell 34XX Computer Accessories User Manual


 
146 Configuring System Information
www.dell.com | support.dell.com
Defining DNS Domain Names Using the CLI Commands
The following table summarizes the CLI commands for configuring DNS domain names:
The following is an example of the CLI commands:
Mapping Domain Host
The
Host Name Mapping
page provides parameters for assigning IP addresses to static host
names. On this page, one IP address per host can be assigned.
To open the
Host Name Mapping
page,
click
System
IP Addressing
Host Name Mapping
in the tree view.
Figure 6-32. Host Name Mapping
Table 6-34. DNS Domain Name CLI Commands
CLI Command Description
ip domain-name
name
Defines a default domain name that the software uses to
complete unqualified host names.
no ip domain-name
Disable the use of the Domain Name System (DNS).
show hosts [
name
]
Displays the default domain name, list of name server hosts,
the static and the cached list of host names and addresses.
console(config)# ip domain-name dell.com