Filter
Top Products
160 Configuring System Information
www.dell.com | support.dell.com
Figure 6-41. Profile Rules Table
Removing a Rule
1
Open the
Access Profiles
page.
2
Click
Show All
.
The
Profile Rules Table
page opens.
3
Select a rule.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The selected rule is deleted, and the device is updated.
Defining Access Profiles Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Access Profiles
page.
Table 6-39. Access Profiles CLI Commands
CLI Command Description
management access-list
name
Defines an access-list for management, and enters the
access-list context for configuration.
permit
[
ethernet
interface-
number
|
vlan
vlan-id
|
port-
channel
number
] [
service
service
]
Sets port permitting conditions for the management
access list.
permit
ip-source
ip-address
[
mask
mask
|
prefix-length
]
[
ethernet
interface-number
|
vlan
vlan-id
| port-channel
number
] [
service
service
]
Sets port permitting conditions for the management
access list, and the selected management method.