Filter
Top Products
220 Configuring System Information
www.dell.com | support.dell.com
Destination
— Indicates the destination configuration file to which the source file is copied.
Files cannot be copied to the Backup Master’s backup file. Backup files appear in the
Destination Unit
field only if backup files have been defined. Select the
New File Name
checkbox and indicate the name of the new file to copy the source file to a new backup
configuration file.
New File Name
— Indicates the name of the newly created backup configuration file.
Restore Configuration Factory Defaults
— When selected, indicates that the current
configuration settings should be replaced by the factory configuration default settings. When clear,
indicates that the current configuration settings should be maintained.
Copying Files
1
Open the
Copy Files
page.
2
Define the
Source
and
Destination
fields.
3
Click
Apply Changes
.
The file is copied, and the device is updated.
Restoring Company Factory Default Settings
1
Open the
Copy Files
page.
2
Click
Restore Configuration Factory Defaults
.
3
Click
Apply Changes
.
The company factory default settings are restored, and the device is updated.
Copying and Deleting Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Copy Files
page.
Table 6-58. Copy Files CLI Commands
CLI Command Description
copy
source-url destination-url
Copies any file from a source to a destination.
delete startup-config
Deletes the startup-config file.