Filter
Top Products
Configuring Switch Information 259
In addition to the fields in the
Storm Control
page, the
Storm Control Settings Table
contains the
following additional fields:
Copy Parameters from Port
— Indicates the specific port from which storm control parameters
are copied.
Copying Parameters in the Storm Control Settings Table
1
Open the
Storm Control
page.
2
Click
Show All
.
The
Storm Control Settings Table
opens.
3
Select the port from which settings are copied from the
Copy Parameters from Port
field.
4
Check the
Copy to
check box to define the interfaces to which the storm control definitions
are copied, or click
Select All
to copy the definitions to all ports.
5
Click
Apply Changes
.
The parameters are copied to the selected ports in the
Storm Control Settings Table
, and the
device is updated.
Configuring Storm Control with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Storm Control as
displayed on the
Storm Control
page.
Table 7-69. Storm Control CLI Commands
CLI Command Description
port storm-control
include-multicast
Enables the device to count Multicast,
Unicast, and Broadcast packets together.
port storm-control
broadcast enable
Enables broadcast storm control.
port storm-control
broadcast rate
Configures the maximum broadcast rate.
show ports storm-control
port
Displays the storm control configuration.