Filter
Top Products
300 Configuring Switch Information
www.dell.com | support.dell.com
Defining VLAN Membership
The
VLAN Membership
page contains fields for defining VLAN groups. The device supports the
mapping of 4094 VLAN IDs to 256 VLANs.
All ports must have a defined PVID. If no other value
is configured the default VLAN PVID is used.
VLAN ID #1 is the default VLAN, and cannot be
deleted from the system. To open the
VLAN Membership
page, click
Switch
→
VLAN
→
VLAN
Membership
in the tree view.
Figure 7-30. VLAN Membership
The
VLAN Membership
page contains the following fields:
Show VLAN
— Lists and displays specific VLAN information according to VLAN ID or VLAN
name.
VLAN Name
(0-32 Characters) — The user-defined VLAN name.
Status
— The VLAN type. Possible values are:
Dynamic
— The VLAN was dynamically created through GVRP.
Static
— The VLAN is user-defined.
Default
— The VLAN is the default VLAN.
Authentication Not Required
— Enables or disables unauthorized users from accessing a VLAN.
Remove VLAN
— When selected, removes the VLAN from the VLAN Membership Table.